Jetta Mk4 4Motion - 1J - 1999-2005

Front Wishbone Front Bush 30mm - 2 x PFF85-201H If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Wishbone Front Bush 30mm - 2 x PFF85-201 If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Wishbone Front Bush 30mm - 2 x PFF85-201BLK If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check...

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410H If fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in width Size23mm arm width Diagram Reference2 CompoundHeritage Location on...

Front Wishbone Rear Bush, Pattern Arm - 21mm arm width - 2 x PFF85-410PA This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm Size21mm Arm Width Diagram Reference2 CompoundRoad Series Location on...

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410BLK If fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in width Size23mm Arm Width Diagram Reference2 CompoundBlack Series Location on...

Front Wishbone Rear Bush - 23mm arm width - 2 x PFF85-410 If fitting this bush to A3 MK1 2WD or Seat Leon & Cupra MK1, it only fits pressed steel genuine OE arms 23mm in width Size23mm Arm Width Diagram Reference2 CompoundRoad Series Location on...

Front Wishbone Rear Bush (Track/Race) - 2 x PFF85-414 Fits Pressed Steel and Cast Wishbones. Designed for Motorsport Use, it is a Rose Joint Type Bush. This bush is suitable for Road and Black Series applications. It is the same part as the Road Series...

Front Wishbone Rear Bush, Pattern Arm - 21mm arm width - 2 x PFF85-410PABLK This bush is designed specifically to fit aftermarket arms with a hole depth of 21mm Size21mm arm width Diagram Reference2 CompoundBlack Series Location on...

Front Wishbone Rear Bush (Track/Race) - 2 x PFF85-414BLK Fits Pressed Steel and Cast Wishbones. Designed for Motorsport Use, it is a Rose Joint Type Bush. This bush is suitable for Road and Black Series applications. It is the same part as the Road...

Front Anti Roll Bar Bush 19mm - 2 x PFF85-411-19H Please check anti roll bar diameter before ordering Size19mm Diagram Reference3 CompoundHeritage Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF85-411-19H - Front Anti Roll Bar...

Front Anti Roll Bar Mount 23mm - 2 x PFF85-411-23H Please check anti roll bar diameter before ordering Size23mm Diagram Reference3 CompoundHeritage Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF85-411-23H - Front Anti Roll Bar...