Oil Lines and Parts

M8x20  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 20mm to be used as Downpipe Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 20mm Short Threaded end: 10mm Overall Length: 30mm (See...

M8x30  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 30mm (Overall Length) to be used as manifold Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 30mm Short Threaded end:...

Garrett VZK Oil Return Adapter Plate Kit These fittings are to be used when retro-fitting a Garrett VZK Turbo to a VAG TDi Engine The Flange is CNC Machined from Billet AlloyThis kit includes the following:CNC Machined VZK Oil Return PlateOil Return...

OE VZK Turbocharger Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the VZK turbocharger on the later 2.7 / 3.0 TDI Audi Vehicles This kit is made up of OE / Audi Parts; 1 x Downpipe Gasket1x Oil Return...

GTB1756VK / GTB2056VK / GTB2260VK 2.7 & 3.0 TDI Turbo Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the turbocharger on the 2.7 / 3.0 TDI Vehicles This kit is made up of OE / Audi Parts; 2 x Oil Feed...

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

NXS Motorsports Signature Series Manual Boost Controller These units incorporate a stainless steel spring and stainless steel ball bearing. This combination allows your engine to realize gains of up to 30 psi while being able to fine tune your desired...

Darkside Oil Drain Fitting Fits Garrett Turbos with the 38mm Oil Drains Fits Garrett Turbos with the 38mm Oil Drainers Perfect for creating your own oil drain / return line to be used with a 0.5" hose Made in the UK  Overall Length -...

OE - M8 12mm Exhaust Nut (x1) Special VW Size Exhaust Nut M8 Thread with 12mm Across Flats used on the Exhaust Manifold Studs and Downpipe Studs