Oil Lines and Parts

Genuine VW M8 10mm Copper Exhaust Nut Special VW Size Exhaust Nuts M8 Thread with 10mm 6 Point head used on the Exhaust Manifold Studs and Downpipe Studs ...

M10x1.5 to M8x1.25 Repair Exhaust Studs These studs are ideal for replacing damaged / stripped M8x1.25 threads. Simple drill out and retap to M10x1.5 The M8 side can be cut to the desired length so can be used on most...

Nord-Lock M8 Steel Lock Washers These new Nord-Lock x-series washers are idea for securing turbochanges, manifold and downpipes We have sometimes found in the past that the heat cycles and vibrations caused by the engine can loosen nuts and bolts on...

Vacuum Actuator Bracket for Garrett GT1749 Series  Fits ALL Garrett Turbochargers found on the VW / Audi / Seat and Skoda 1.9 and 2.0 TDI Engines These Actuators are a direct replacement for the standard actuator bracket on the...

M8x20  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 20mm to be used as Downpipe Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 20mm Short Threaded end: 10mm Overall Length: 30mm (See...

M8x30  Exhaust Studs Special VW Size Exhaust Studs - M8 Thread by 30mm (Overall Length) to be used as manifold Studs Price is EACH. VW charge ~£1.20 + VAT for these Size:Long Threaded end: 30mm Short Threaded end:...

Garrett VZK Oil Return Adapter Plate Kit These fittings are to be used when retro-fitting a Garrett VZK Turbo to a VAG TDi Engine The Flange is CNC Machined from Billet AlloyThis kit includes the following:CNC Machined VZK Oil Return PlateOil Return...

OE VZK Turbocharger Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the VZK turbocharger on the later 2.7 / 3.0 TDI Audi Vehicles This kit is made up of OE / Audi Parts; 1 x Downpipe Gasket1x Oil Return...

GTB1756VK / GTB2056VK / GTB2260VK 2.7 & 3.0 TDI Turbo Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the turbocharger on the 2.7 / 3.0 TDI Vehicles This kit is made up of OE / Audi Parts; 2 x Oil Feed...

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

NXS Motorsports Signature Series Manual Boost Controller These units incorporate a stainless steel spring and stainless steel ball bearing. This combination allows your engine to realize gains of up to 30 psi while being able to fine tune your desired...