null

5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets

SKU:
DSD1123.1
Shipping:
Calculated at Checkout
  • 5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets
  • 5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets
  • 5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets
  • 5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets
£294.00 - £690.00 (Inc. VAT)
£245.00 - £575.00 (Ex. VAT)

Description

5 Speed 02J, 02A ,02B, 02C & 02Z - .592, .622, .658, .681, .700, .717 & .744 5th Gear Sets

Genuine VW 5 Speed .592 .622 .658 .681 .700 .717 & .744 5th Gear Sets

Fits all VW / Audi / Seat and Skoda with the 5 Speed 02J, 02A, 02B, 02C and 02Z Gearboxes

These Transporter T4 Gears are a popular conversion on the TDIs to give a longer 5th Gear on the 5 Speed Gearboxes found in 1992 - 2005 model vehicles

The .592 and .622 are the Longest Gearsets but some customers prefer the smaller gap between 4th and 5th using the .658 or .681 Gearset. Please check which 5th Gear you currently have to ensure the drop from 4th to 5th is not too severe

Pulling the gears is very easy! You heat the gear using an electric heat gun to 100C and the gears slide off. If you try to pull the gear without heating you may crack the gears. Same goes for reinstalling, heat it to 100C and it will slide onto the shaft

All the .592, .622 and .658 Gears now come with a New Thrust Washer and all Gears come with a new End Seal

This kit consists of:

Genuine VW Small 5th Gear
Genuine VW Large 5th Gear
Genuine VW Washer
Genuine VW End Seal

There is a good guide on MyTurboDiesel:

http://www.myturbodiesel.com/1000q/multi/5th-gear-swap-VW.htm

It is recommended that you change your gear oil at the same time. You need 2L of G070726A2 Oil, which we have listed here

https://www.darksidedevelopments.co.uk/products/genuine-02j-02j-b-02r-transmission-oil-1l-g-070-726-a2.html

This kit will NOT fit vehicles with a 6 Speed Transmission

Some vehicles with Cruise control may need the ECU reprogramming as the longer gears can prevent the Cruise from working correctly

Estimated Fitting Costs

Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire

Estimated Labour Time (Hours) Labour Cost
300
For more Information or to make a booking, please CONTACT US
View AllClose
SUBSCRIBE