Description
Audi S3 (FMIC) Intercooler Conversion for 1.9 TDi PD100, PD115 & PD130 inc Alloy Radiator & Hard Pipework Kit
As standard the Audi S3 Intercooler does not fit the above models due to their side mount intercooler, difference in the front slam panel & radiator fitment
This kit has specifically been designed to allow fitment of our modified Audi S3 intercooler to these models with the addition of a modified performance alloy radiator and hard pipework kit to suit. This is the recommend set up for track / fast road cars
This kit consists of:
Modified Audi S3 Alloy Front Mount Intercooler
Performance Alloy Radiator
Mounting Brackets
Darkside Developments Alloy Pipe Kit with MAP Sensor Boss
Darkside Developments Silicone Hoses
Darkside Developments Turbo Clip Adapter (Optional)
Darkside Developments EGR/ASV Clip Adapter (Optional)
Stainless Steel Clamps
(Optional) - Aftermarket PD150 ARL Aircon Condenser
IMPORTANT! - This kit requires the PD150 Fan Pack (1J0121207AA - 1J0121207 AA - 1J0 121 207 AA) but retains standard coolant and air con pipes
Benefits of the Audi S3 Intercooler:
Alloy End tanks to hold higher levels of boost
Used on applications well over 300bhp
Better cooling capacity over stock SMIC and other smaller FMIC kits
S3 Intercooler Dimensions
Width at top - 730mm
Bottom - 840mm
Height - 420mm
Thickness - 50mm
Inlet / Outlet - 57mm
Core Size - 620mm x 420mm x 40mm
VW Golf Mk4 - ATD / AXR 100, AJM / AUY 115, ASZ 130
VW Bora / Jetta - ATD / AXR 100, AJM / AUY 115, ASZ 130
This will also fit US SPEC - BEW 100 engines with a VNT17 or GTB Turbocharger
This kit will not fit the PD130 ASZ Seat Ibiza / VW Polo and Skoda Fabia, the kit for these vehicles can be found here:
https://www.darksidedevelopments.co.uk/products/hard-pipework-kit-for-seat-ibiza-vw-polo-skoda-fabia-with-seatsport-fmic.html
https://www.darksidedevelopments.co.uk/products/seatsport-ibiza-cupra-intercooler-for-seat-ibiza-vw-polo-skoda-fabia.html
(Sometimes the turbo clip can be quite tight to push in due the tolerances we have them machined to. We have found that warming the turbo compressor housing with a heat gun helps the clip push in)
Additional Information
Vehicle Manufacturer: |
VAG |
Product Type: |
Intercooler / Pipework Kits |