Description
Ideal for BLS / BRM / BMM Models fitted with AirCon. For models without AirCon please see our FMIC KIT
-
No Clip connectors which can cause boost leaks
-
Alloy End tanks instead of plastic to hold higher levels of boost
- Modified to fit the BLS / BRM PD105 and BMM PD140 Engine with top and bottom inlets
- Used on applications well over 300bhp
This Upgraded Intercooler eliminates the two problematic clip connectors going on the Intercooler which can crack or wear out, causing boost leaks. The end tanks are also Alloy instead of plastic which will hold higher levels of boost
The stock intercooler hoses can be used by removing the metal clip connectors and securing with T-Bolt Clamps
All bolts for fitting are included, if you require 57mm Clamps these can be found here:
https://www.darksidedevelopments.co.uk/products/stainless-t-bolt-clamps.html
Please Note; the slam panel / plastic shroud will need slight modification (trimming) to allow installation of the larger core
Dimensions
Width at top - 730mm
Bottom - 840mm
Height - 420mm
Thickness - 50mm
Inlet / Outlet - 57mm
We also produce a Hard Pipe Kits which removes all of the clip connectors:
Hardpipe Kit for 1.9 8v TDi BLS / BRM PD105 and BMM PD140 Engine - https://www.darksidedevelopments.co.uk/products/hard-pipework-kit-for-1-9-8v-tdi-bls-brm-pd105-and-bmm-pd140-engine.html
The Modified S3 Intercooler will fit the following vehicles:
PLEASE NOTE: This Intercooler will NOT work with models that have both the intercooler inlets / outlets on the bottom of the stock Intercooler. For these models you can use the Stock S3 Intercooler or our Darkside S3 Intercooler