Description
Bilstein B6 Front +20-50mm Lift Kit inc Rear Dampers for VW Amarok
Bilstein B6 Series front shocks coupled with +20-50mm lift springs and rear dampers If lift springs are used on stock dampers the ride can become compromised and crashy. This complete set up retains performance and handling, while still providing a comfortable, stable ride even when lifted From factory, the rear of the Amarok sits higher than the front to allow for additional payload. Lifting the front will give a more even ride height all roundPlease Note:
These dampers offer greater range of travel, therefore, it's possible for the front CV's to knock. Especially under towing or aggressive acceleration. We recommend combining this kit with front differential drop and / or rear air assist to minimise squat. A link to this kit can be found below in this listingTHIS KIT CONSISTS OF:
2 x Bilstein B6 Front Dampers / Shocks2 x Bilstein Front Lift Springs (+20-50mm)
2 x Bilstein B6 Rear Dampers
1 x C-Spanner
For more information on Lifting (and Lowering) VW Amarok's please read our blog:
https://www.darksidedevelopments.co.uk/Blog/vw-amarok-suspension-guide/
We highly recommend fitting the Camber Correction Bush Kit when lifting these vehicles. We have it listed here:
Amarok Diff Drop:
This Kit will fit the following Vehicles:
VW Amarok - All modelsThe amount of lift will vary between 2.0 TDI and 3.0 TDI models as well as the vehicle spec
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
240 | |
For more Information or to make a booking, please CONTACT US |