Bilstein B6 Front Dampers for VW Amarok +20-50mm Lift Springs

Bilstein B6 Series shocks designed to work with +20-50mm lift springs

If lift springs are used on stock dampers the ride can become compromised and crashy. These shocks retain performance and handling, while still providing a comfortable, stable ride even when lifted

From factory, the rear of the Amarok sits higher than the front to allow for additional payload. Lifting the front will give a more even ride height all round

Please Note:

These dampers offer greater range of travel, therefore, it's possible for the front CV's to knock. Especially under towing or aggressive acceleration.
We recommend combining this kit with front differential drop and / or rear air assist to minimise squat

THIS KIT CONSISTS OF:

2 x Bilstein B6 Front Dampers / Shocks

These shocks are designed to work with OE fit front lift springs (+20-50mm). We offer the full struts and lift springs here:

https://www.darksidedevelopments.co.uk/products/bilstein-b6-front-lift-kit-for-vw-amarok-20-50mm.html

Full Bilstein B6 front lift kit with rear dampers:

https://www.darksidedevelopments.co.uk/products/bilstein-b6-front-20-50mm-lift-kit-inc-rear-dampers-for-vw-amarok.html

For more information on Lifting and Lowering VW Amarok's please read our blog:

https://www.darksidedevelopments.co.uk/Blog/vw-amarok-suspension-guide/

We highly recommend fitting the Camber Correction Bush Kit when lifting these vehicles. We have it listed here:

https://www.darksidedevelopments.co.uk/products/superpro-amarok-upper-control-arm-camber-correction-inner-bush-kit.html

This Kit will fit the following Vehicles:

VW Amarok - All models