BMW 2.0 & 3.0 Diesel EGR Delete / Race Pipe - (Retaining Clip Fitting for Plastic Boost Pipe)

Darkside BMW 2.0 & 3.0 Diesel EGR Delete / Race Pipe (Retaining Clip Fitting) for M47N2 / M57N / M57N2

This kit replaces the EGR Valve. This can be used if you are wanting to remove the Anti Shudder Valve (ASV) or if the vehicle isn't fitted with one

PLEASE NOTE - THIS KIT IS FOR MODELS WITH THE STOCK PLASTIC BOOST PIPE. YOU MUST CHECK THIS BEFORE ORDERING THIS ITEM

If you have the alloy boost pipe, we have another kit listed. The link is below in this listing.

Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install

As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used

Reduces inlet air temperatures = more power

Prevents inlet and turbo from clogging up

Brushed aluminium finish

Made in the UK

Please Note:

Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emmisions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

PLEASE NOTE: This kit only fits with models with the stock plastic boost pipe

Kit Options:

EGR Delete - A Kit to remove the EGR (Exhaust Gas Recirculation) Valve ONLY, leaving the EGR / Exhaust Cooler in place

EGR & Cooler Delete - A complete kit that removed both the EGR (Exhaust Gas Recirculation) Valve & the EGR Cooler / Exhaust Cooler

This Kit Consists of:

Darkside Developments Race Pipe (Retaining Clip Fitting)
Machined Cap (For Cooler Pipe)
4x M6 BZP Bolts
Vented Grub Screw (Boost Guage Takeoff)
Grub Screw (to block Boost Port)

For more information on EGR Valves and Removal see here:

https://www.darksidedevelopments.co.uk/egr-removal-delete/

For models with stock ALLOY boost pipe, please see the correct EGR delete kit here:

https://www.darksidedevelopments.co.uk/products/bmw-2-0-3-0-m47n2-m57n2-engine-egr-delete-race-pipe.html

Series / Chassis

E60 / E60N / E61 / E61N / E65 / E66 / E70 / E71 / E83 / E83N / E87 / E90 / E91 / E92 / E93

Models

118d / 120d / 318d / 320d / 330d / 330xd / 520d / 525d / 530d / 530xd / 730d / 730Ld / X3 / X5 / X6

Engines

M47N2 / M57N / M57N2

This Kit will fit the following Vehicles:

E60 M47N2 520d Saloon
E60 M57N 525d Saloon
E60 M57N2 530d Saloon
E60 M57N2 530xd Saloon
E60N M47N2 520d Saloon
E60N M57N2 530d Saloon
E60N M57N2 530xd Saloon
E61 M47N2 520d Touring
E61 M57N 525d Touring
E61 M57N2 530d Touring
E61 M57N2 530xd Touring
E61N M47N2 520d Touring
E61N M57N2 530d Touring
E61N M57N2 530xd Touring
E65 M57N2 730d Saloon
E66 M57N2 730Ld Saloon
E70 M57N2 X5 3.0d SAV
E71 M57N2 X6 30dX SAC
E83 M47N2 X3 2.0d SAV
E83 M57N X3 3.0d SAV
E83 M57N2 X3 3.0d SAV
E83N M47N2 X3 2.0d SAV
E83N M57N2 X3 3.0d SAV
E87 M47N2 118d 5 doors
E87 M47N2 120d 5 doors
E90 M47N2 318d Saloon
E90 M47N2 320d Saloon
E90 M57N2 330d Saloon
E90 M57N2 330xd Saloon
E91 M47N2 318d Touring
E91 M47N2 320d Touring
E91 M57N2 330d Touring
E91 M57N2 330xd Touring
E92 M57N2 330d Coupe
E92 M57N2 330xd Coupe
E93 M57N2 330d Convertible

Replaces BMW EGR Valve Part Numbers:

11 71 7 804 381 - 11717804381 - 7 804 381 - 7804381
11 71 7 792 077 - 11717792077 - 7 792 077 - 7792077

SUITABLE FOR OE PLASTIC PIPE ONLY

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country