Description
Boost Hoses for Darkside S3 Intercooler
Darkside Boost Hoses / Boost Pipe Kit for Darkside S3 Intercooler These silicone hoses are required when fitting our Upgraded S3 Intercooler with the 70mm Inlet / Outlet to the Mk5 Platform Vehicles, but want to retain the stock Boost Hoses We have the 70mm S3 Intercooler Listed Here - DARKSIDE S3 INTERCOOLER When fitting a Genuine S3 Intercooler to a TDI you would remove the clip connectors from the standard pipes and slide them over the 57mm Inlet / Outlet. Whereas with the Upgraded S3 Intercooler, you require these hoses to fit over the larger 70mm Inlet / Outlet.Petrol Models:
Some TFSI models may need to space the stock aluminum pipe off of the engine
TFSI / TSI / FSI Models have two types of Clip Connector. Please see above photos. It is crucial you check your original clip connector BEFORE ordering! We cannot determine which Clip Connector is required for your vehicle
The options are;- FSI / TSI / TFSI (Clip with Larger Lugs)- FSI / TSI / TFSI (Clip with Smaller Lugs)
We also produce Hard Pipe Kits for various TDI models which removes all of the clip connectors. Please see below in this listing.
PLEASE NOTE:
This kit is NOT suitable for Ibiza / Polo / Fabia platform For 1.6 & 2.0 TDi Common Rail Engines as well as the 2.0 16v PPD170 Engine use Option '2.0 TDI 170hp & 1.6 / 2.0 TDi CR'Please Note:
On the 2009 onwards models, you must check that the inlet and outlet is at the bottom on both sides of the intercooler2.0 16v TDi (BKD) Engines
2.0 16v TDI (BMN BMR) Engines
1.9 8v TDI (PD105) Engines
https://www.darksidedevelopments.co.uk/products/hard-pipework-kit-for-1-9-8v-tdi-pd105-engine.html
1.6 / 2.0 16v TDI (Common Rail Engines)
This pipe kit will fit the following vehicles with the Darkside S3 Intercooler:
VW Golf Mk5 / Mk6
Golf Mk5 / Mk6 Plus
VW Jetta
VW Touran
VW Eos
VW Scirocco
VW Caddy Mk3
Skoda Octavia
Seat Leon Mk2
Seat Altea
Seat Toledo
Audi A3 8P