Darkside 57mm EGR Delete / Race Pipe for BRM Intake Manifold

EGR Delete Pipe Kit suitable for US Spec 1.9 8v VE & PD Engines with BRM Intake Manifold

This kit was developed solely to be used with the 1.9 TDI VE engines when fitted with the BRM Intake Manifold

PLEASE NOTE - When fitting this 57mm Race Pipe on the VE & PD engines with the BRM intake manifold, custom pipework WILL be required

Designed & Made in the UK

Reduces inlet air temperatures = more power

Prevents inlet and turbo from clogging up

Brushed aluminium finish

CNC Machined from a single aluminum billet

Race Pipe Dimensions:

Outer Diameter - 57mm
Inner Diameter - 49mm
Pipe Length (including flange) - 110mm
Pipe Length (excluding flange) - 100mm

Please Note:

Custom Pipework will be required

Grub Screw Design:

Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost gauge from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install

This kit consists of:

1x Darkside Developments Billet Alloy EGR Delete
1x Large EGR Blanking Plate
1x Medium EGR Blanking Plate
2x EGR Gaskets
1x Rubber O-Ring
2x Nuts
3x Bolts
1x Vented Grub Screw (suitable for running boost gauge)
1x Grub Screw (to blank tapped hole if not running boost gauge)
2x T-Bolt Clamps (54-62mm & 60-68mm)

Please Note - Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emmisions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU

For more information on EGR Valves and Removal see here:

https://www.darksidedevelopments.co.uk/egr-removal-delete/

For BRM PD Engines, you will require a 57mm 90 Degree silicone in order to remove the ASV. We have these listed here:

https://www.darksidedevelopments.co.uk/products/darkside-57mm-2-25-90-degree-elbow-silicone-boost-hose.html

This Kit will fit Vehicles with the following Engine Codes:

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country