Darkside Caddy Mk3 / Mk4 Lowering Kit with Eibach Front Lowering Springs

Darkside Caddy 2K Mk3 / Mk4 Rear Lowering Kit with Eibach Front Lowering Springs

Fits Caddy Mk3 / Mk4 2K Van / Maxi Rear Axle (FWD & 4Motion)

Eibach Front Springs for the VW Caddy Mk3 / Mk4 which will give around a 60mm drop when settled. The Eibach Lowering Springs lower the vehicle center of gravity and reduce body roll for better handling as well as reducing the large arch gap that comes on the van from the factory.

Our lastest design of rear lowering kit combines both our previous low and super low kits. One of the features we have kept on our new kit to keeping the length of the rear hangers short allowing them to tuck behind the rear bumper. This also aids ground clearance as we found the old 'low kit' shackles hung quite low, which could cause problems going up steep driveways or kerbs.

Our new kit has been designed to accommodate all ride heights keeping the rear wheel as central as possible in the arch

They are full adjustable with 6 different height options. The beauty of this setup is that you can adjust the height as many times as you like by simply adjusting 2 bolts. Perfect if you like to run low but still want the option of carrying some weight. If you do not want so many options, you can cut the plates down to your desired length

Made in the UK

CNC Laser Cut and Zinc Electroplated

Shackle Support Blocks to reduce side to side axle movement

Hidden shackles and more ground clearance

Fully adjustable rear height options from ~50mm - ~100mm

WE ALSO OFFER THIS KIT FOR VEHICLES WITH TWIN REAR LEAF SPRINGS. THIS KIT IS SUPPLIED WITH LONGER BOLTS FOR THE SANDWICH PLATES

PLEASE SELECT FROM THE ABOVE OPTIONS IF YOU REQUIRE THIS.

PLEASE NOTE - THIS KIT IS FOR 'OFF ROAD USE' ONLY

ONCE FITTED YOU MAY NOTICE SIDE TO SIDE MOVEMENT IN THE REAR AXLE, THIS MOVEMENT IS NORMAL AND PRESENT FROM FACTORY BUT NOT USUALLY NOTICEABLE WITH THE STOCK WHEELS AND RIDE HEIGHT. WITH THE VAN LOWERED THE WHEEL BECOMES CLOSER TO THE BODY TO THIS MOVEMENT IS HIGHLIGHTED AND EASIER TO NOTICE, MORE SO WITH AFTERMARKET WHEELS THAT PROTUDE FURTHER FROM THE ARCH

THE PARTS ARE CNC LASER CUT AND THEN ZINC ELECTROPLATED TO PREVENT CORROSION

We also have a full fitting guide, please see our Website

This kit consists of:

Eibach Front Lowering Springs
4 x Adjustable Shackle Plates (2 per side)
6 x Axle Sandwich Plates (3 Per Side)
8 x Hi-Tensile Bolts
8 x Nyloc Nuts
16 x Washers
2 x Shackle Support Blocks

If you have previously purchased the Lowering Kit and require the longer bolts for twin leaf spring vehicles, we have them listed here:

https://www.darksidedevelopments.co.uk/products/bolt-kit-for-caddy-rear-lowering-kit-vehicles-with-twin-leaf-spring.html

Pair perfectly with these Bilstein B8 Front Struts:

https://www.darksidedevelopments.co.uk/products/pair-of-bilstein-b8-performance-front-shock-absorber-for-vag-mk5-platform-vehicles.html

And these Bilstein B8 Rear Shock Absorbers:

https://www.darksidedevelopments.co.uk/products/vw-caddy-mk3-mk4-van-bilstein-b8-rear-shock-absorbers.html

This Kit will fit the following Vehicles:

VW Caddy MK3 / MK4, Caddy Life and Caddy Maxi