Description
DPF Delete Downpipe for 1.2 / 1.6 & 2.0 TDi CR140/143 (Mk5 Seat Ibiza, Polo, Audi A1 and Skoda Fabia)
2.5" Stainless Downpipe DPF / CAT Delete for 1.2, 1.6 & 2.0 TDi Mk5 Seat Ibiza / Audi A1 / Skoda Fabia CR140 Fits the 1.2, 1.6 & 2.0 TDi CR140 (Mk5 Seat Ibiza / Audi A1 and Skoda Fabia) This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) and CAT on the CR140 Mk5 Seat Ibiza & Audi A1 platformThis kit consists of:
1x DPF Delete Downpipe (2-Pieces)1x Downpipe Gasket
1x Downpipe Clamp
1x Stainless V-Band Clamp
1x T-Bolt Clamp
This item will fit Vehicles with the following Engine Codes:
Audi A1 - CFHC, CFHD (CR140/CR143)
Seat Ibiza - CFHC, CFHD (CR140/CR143)
VW Polo TDI - CFWA 75, CAYA 75, CAYB 90, CAYC / CLNA 105
Audi A1 TDI - CAYA 75, CAYB 90, CAYC 105
Seat Ibiza TDI - CFWA 75, CAYA 75, CAYB 90, CAYC / CLNA 105
Skoda Fabia TDI - CFWA 75, CAYA 75, CAYB 90, CAYC / CLNA 105
Skoda Rapid TDI - CAYA 75, CAYB 90, CAYC / CLNA 105
Skoda Roomster TDI - CFWA 75, CAYA 75, CAYB 90, CAYC / CLNA 105
When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights
We will not be responsible for any problems that may occur with any other tuners software
Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way
Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
300 | |
For more Information or to make a booking, please CONTACT US |