Description
DPF Delete Downpipe for 2.0 TDi 16v CR140 and CR170 Tiguan / Yeti / Q3 4Motion / Quattro
2.5" Stainless DPF Delete Downpipe for 2.0 TDi 16v CR140 and CR170 VW Tiguan / Skoda Yeti / Audi Q3 This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the CR140 / CR170 VW Tiguan & Skoda YetiThis Kit Consists of:
2 Part 2.5" Stainless DPF Delete DownpipeDownpipe Gasket
2x T-Bolt Clamps
This Kit will fit the following 4Motion / Quattro Vehicles:
Audi Q3
VW Tiguan - CFFD (110) CBAA (136) CFFA (136) CBAB (140) CFFB (140) CBBA (163) CFGB (170) CBBB (170) CFGC (177)
Skoda Yeti - CFHA / CFHF / CLCA 110 / CFHC / CLCB 140 / CFJA 170
Replaces Genuine VW DPF Part Numbers:
5N0254700G - 5N0254700 G - 5N0 254 700 G5N0254700GX - 5N0254700 GX - 5N0 254 700 GX5N0254700M - 5N0254700 M - 5N0 254 700 M5N0254700MX - 5N0254700 MX - 5N0 254 700 MX5N0254700P - 5N0254700 P - 5N0 254 700 P5N0254700PX - 5N0254700 PX - 5N0 254 700 PX5N0254700Q - 5N0254700 Q - 5N0 254 700 Q5N0254700QX - 5N0254700 QX - 5N0 254 700 QX
Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country
Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
360 | |
For more Information or to make a booking, please CONTACT US |