Description
EGR Blanking Kit for 1.9 / 2.0 TDI 8v BEW / BRR / BRS / BKE / BRB / BPW
This kit blanks off the EGR Valve, Inlet Manifold and Exhaust Manifold.
Please Note: Once blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.
For more information on EGR Valves and Removal see here - https://www.darksidedevelopments.co.uk/egr-removal-delete/
For more information on EGR Valves and Removal see here - https://www.darksidedevelopments.co.uk/egr-removal-delete/
Included In this kit;
2 x Large Darkside EGR Blanking Plates
2 x Genuine Large Gaskets
2 x Nuts
2 x M8 Bolts with Lock Washers
1 x Inlet Blanking Plate
2 x Genuine Large Gaskets
2 x Nuts
2 x M8 Bolts with Lock Washers
1 x Inlet Blanking Plate
1 x Inlet Blank Gasket
3 x M6 Bolts with washers
1 x EGR Cooler Delete Joiner
To fit the following Engine Codes (can be found on a sticker on the Cam Belt Cover or in the Boot):
Audi A4 / Avant - BKE (115) BRB (116) BPW (140)
Audi A4 / S4 / Avant / quattro - BKE (115) BRB (116) BPW (140)
Skoda Superb - BSV (105) BPZ (116) BWW (124) BSS (140)
VW Beetle - BEW (100) ATD (100)
VW Bora - BEW (100)
VW Campmobile Type 2 / T2 - BRR (84) BRS (102)
VW Clasico / Jetta - BEW (100)
VW Golf - BEW (100)
VW Jetta - BEW (100)
VW Jetta Variant - BEW (100)
VW New Beetle - BEW (100)
VW Passat / Variant - BPZ (116) BHW (136) BGW (136)
VW Transporter Kombi - BRR (84) BRS (102)