Description
EGR Blanking Kit for Early 2.7 / 3.0 TDI Engines
Darkside EGR Blanking Kit to fit early 2.7 / 3.0 TDI Engines This EGR Blanking Kit will fit the models and engine codes listed below Please Note: Once blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dashboard. We can remove this by reprogramming the EGR software on the ECU.PLEASE NOTE: TWO DIFFERENT KITS MAY BE SUPPLIED DEPENDING ON THE EGR GASKET FOUND ON THE EXHAUST MANIFOLD Y-PIECE (SEE LISTING PICTURES ABOVE)
This Kit Consists of:
2x EGR Blanking Plates2x EGR Pipe / Blank Gaskets
4x Bolts
Fitment Data
This Kit will fit the following Vehicles:
Audi A4 / Avant - BSG (163) CAMB (163) CGKB (163) BPP (179) CAMA (190) CGKA (190) BKN (204) CCWB (211) ASB (232) CCLA (239) CCWA (239) CAPA (240)
Audi A4 / S4 / Avant / quattro - BSG (163) CAMB (163) CGKB (163) BPP (179) CGKA (190) CAMA (190) BKN (204) CCWB (211) ASB (232) CCLA (239) CCWA (239) CAPA (240)
Audi A4 / S4 Cabriolet / quattro - BPP (179) BKN (204) ASB (232)
Audi A4 allroad quattro - CCWA (239)
Audi A5 / S5 Cabriolet - CGKB (163) CGKA (190) CCWA (239)
Audi A5 / S5 Coupe Sport - CAMB (163) CGKB (163) CAMA (190) CGKA (190) CCWB (211) CCWA (239) CAPA (240)
Audi A6 / Avant - CAND (163) BSG (163) BPP (179) CANC (190) CANA (190) CDYB (211) BNG (211) BMK (224) ASB (232) CDYC (239) CDYA (239)
Audi A6 / S6 / Avant / quattro - BSG (163) CAND (163) BPP (179) CANC (190) CANA (190) CDYB (211) BNG (211) BMK (224) ASB (232) CDYC (239) CDYA (239)
Audi A6 allroad quattro - CAND (163) BSG (163) BPP (179) CANC (190) CDYB (211) BNG (211) ASB (232) CDYC (239) CDYA (239)
Audi A8 - BNG (211) ASB (232)
Audi A8 / S8 quattro - BNG (211) ASB (232)
Audi Q5 - CCWB (211) CCWA (239)
Audi Q7 - BUN (211) CASB (211) CATA (224) BUG (232) CCMA (239) CASA (240)
VW Phaeton - BMK (224) CARA (234) CARB (239) CEXA (239) CEXB (245)
VW Touareg - CASD (204) CASB (211) BUN (211) CATA (224) BKS (225) CASC (239) CASA (240) CKDA (340)
Audi A6 / Avant - CANB (163)
Audi A6 / S6 / Avant / quattro - CANB (163)
We supply 2 blanking plates to blank both the exhaust and inlet side. Some people may find it easier just to install 1 or the other depending on the vehicle and other work been carried out.
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
| Estimated Labour Time (Hours) | Labour Cost |
|---|---|
| 120 | |
| For more Information or to make a booking, please CONTACT US | |