Description
Golf A5 / Jetta MKV TDI 02Q 5 Speed to 6 Speed Conversion Kit
All prices quoted are in £ / GBP / British Pound and INCLUDE DHL EXPRESS SHIPPING to the USA and Canada
For estimated conversion rates, please check http://www.xe.com/
For European Customers all prices are + VAT and extra shipping costs may apply to all customers outside of the USA and Canada - Please contact us
The standard 5 to 6 Speed setup comes with all the items you see in the picture. It is everything you need to upgrade from a 5 Speed Manual to the 6 Speed in the Golf A5 / Jetta MKV TDI Models
This conversion will also fit new models with stop / start but this will not longer be active and will require deleting from the software.
Please note that these are used transmissions / gearboxes, that are fully checked prior to shipping.
The Drivehshafts are also used units, that are fully checked and rebuilt when necessary
This kit consists of:
02Q 6 Speed Gearbox
2x Used Drive Shafts
Gearbox Mount
Dog Bone Mount
Starter Motor
Dust Tins from the Engine
Shifter Mount and End Links
All bolts required (New where needed)
Used 6 Speed Gear Gaiter
Optional - Clutch and Flywheel Kit
We can also supply a range of Clutch and Flywheel kits depending on your goals:
Option 1: Brand New OEM Sachs Dual Mass Flywheel and Clutch kit with Release Bearing. These are good for 200hp and 330lbs/ft
https://www.darksidedevelopments.co.uk/products/sachs-2-0-tdi-6-speed-02q-dual-mass-flywheel-and-clutch-kit.html
Option 2: Valeo Budget Single Mass Flywheel (SMF) and Clutch Kit with release bearing. These are good for 200hp and 330lbs/ft
https://www.darksidedevelopments.co.uk/products/valeo-2-0-tdi-6-speed-02q-single-mass-flywheel-and-clutch-kit-smf.html
Option 3: Darkside Billet Single Mass Flywheel (SMF) & Clutch Kit with release bearing. These are good for 300hp+ (Choice of Discs)
https://www.darksidedevelopments.co.uk/products/darkside-billet-single-mass-flywheel-smf-clutch-kit-for-vw-02q-6-speed.html
The Solid Flywheels can give a little chatter at Idle and Low RPMs but these are more than acceptable
For customers wanting to all out we can also supply and fit a Quaife ATB LSD, with new ARP Bolts, Bearings and Upgrades Forks for an additional cost - Please contact us if you would like this option
https://www.darksidedevelopments.co.uk/products/quaife-02Q-2wd-atb-helical-limited-slip-diff-lsd.html
There are 2 main groups of subcode with the same ratios (there are 4 groups in total, but the other 2 have almost the same ratios as the 5 speed so I have left them out).
They are all based on the 02Q 6 Speed Box, which is an uprated version of the 02M found in the A4 Golfs. The difference being the lack of a speed sensor and strengthening to the casing on the 02Q.
02Q 6 Speed Group 1
1st 3.769 - 2nd 2.087 - 3rd 1.324 - 4th 0.919 - 5th 0.902 - 6th 0.757 - Rev 1.643 - FD1 3.684 - FD2 2.917
02Q 6 Speed Group 2
1st 3.769 - 2nd 2.087 - 3rd 1.324 - 4th 0.977 - 5th 0.975 - 6th 0.814 - Rev 1.643 - FD1 3.45 - FD2 2.76
The 02Q Uses 2 final drives. FD1 for 1st - 4th, FD2 for 5th & 6th.
02J 5 Speed - GQQ, JCR - For comparison
1st 3.778 - 2nd 2.063 - 3rd 1.348 - 4th 0.967 - 5th 0.744 FD 3.389
With the Group 1 ratios, you are looking at about 100MPH in 6th @ 3000RPM with 205/55/R16 Tyres. The Group 2 would be @ 98MPH.
This compares to 88MPH in 5th on the 5 Speed, a very nice increase!
To put it another way, at 75MPH the BRM 5 Speed is @ 2555RPM, whereas the 6 speed is @ 2237RPM (318RPM Decrease), with 205/55/R16 Tyres.