Haldex Performance Controller Generation 5 / Gen5 0CQ (MQB)

Gen5 0CQ (MQB Platform) Haldex Performance Controller to allow full control of the Haldex System.

Ideal to be used for Dragrace, Track, Street and Daily driving

The Haldex Controller can be used in original 4Motion vehicles with the plug and play solution or run the Haldex in a standalone solution. The standalone solution does not need any other sensors like the ABS, all controls are made with the Haldex Controller App. Switching driving modes, creating Maps and viewing Haldex data. The system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car.

Allows complete control of the Haldex

Available in Plug and Play or Standalone Units

Easy Installation

Controlled from your Phone

Plug and Play:

This kit is manufactured for original 4Motion Vehicles and is a true plug and play unit.

Standalone:

The standalone kit is manufactured with open end wires, specifically designed for 4Motion swapped vehicles.

Controlled by the App:

All controls can be monitored via the "VE AWD Controller" app, available on both iOS and Android Devices.

Features:

OFF mode

Turn the Haldex completely off including the pre charge pump. The car will drive like any normal 2WD car.

Locked mode

Lock the Haldex to a fixed value with the App no matter what the car does the Haldex will always stay at the selected power split. Can be adjusted in steps of 10%. 100/0, 90/0, 80/0, 70/30, 60/40, 50/50.
100 / 0 is 0% to the haldex unit but the pre charge pump is still active.

Throttle mode

The Haldex power is set by the custom configured value at a certain throttle position. Throttle position in steps of 10%.
0 – 10% 50 / 50
10 – 20% 60 / 40
20 – 30% 50 / 40

Speed mode

The Haldex power is set by the custom configured value at a certain speed. Speed in steps of 20 km/h.
0 – 20 km/h 50 / 50
20 – 40 km/h 60 / 40
40 – 60 km/h 50 / 40

Boost mode

The Haldex power is set by the custom configured value at a certain boost value. Boost value in steps of 250 mBar.

MAP mode

A more advanced mode that will use both throttle and speed input signal.
Extra advanced option for steering angle.

Track mode

Mode for track race. this mode uses norm. throttle, steering angle and speed. fully customizable.
Advanced features like brake settings and lock hold.

Passthru mode

The Haldex will run like stock.
The App will shows the current Haldex power generated by the Haldex.

Standalone functions

Analog Inputs
 Throttle - 5V
 Speed - 12v Vss
 Boost - 5V
 Brake - 12V
 Handbrake - Ground
 Brake input
When the brake signal is applied, the Haldex will be set to 100/0 so no torque is applied to the rear wheels.

Brake Ignore is also possible.

Handbrake input

When the handbrake signal is applied the Haldex will be disabled including the pre charge pump.

Burnouts are possible since the Haldex is completely turned off.

Outputs

Output2 The Controller has a RPM output for converting CAN-BUS RPM to Analog.

Download the iOS App here:

https://apps.apple.com/us/app/ve-awd-controller/id1449704651

Google Play Store App:

https://play.google.com/store/apps/details?id=vanderveerengineering.haldexcontroller

This Kit will fit the following Vehicles:

VW Golf 7R 2013+ Gen5 0CQ
VW Passat 2015+ Gen5 0CQ
Audi TT TTS TTRS 2014+ Gen5 0CQ
Audi A3 S3 RS3 2013+ Gen5 0CQ
Seat Octavia 2013+ Gen5 0CQ