Land Rover Freelander TD4 M47 / Range Rover L322 M57 57mm EGR and Cooler Delete / Race Pipe

Land Rover Freelander TD4 M47 / Range Rover L322 M57 57mm EGR and Cooler Delete / Race Pipe

This kit replaces the EGR Valve. This can be used if you are wanting to remove the Anti Shudder Valve (ASV) or if the vehicle isn't fitted with one

Our EGR Delete Kit is machined from a Single Billet so there are no welds. This improves appearance and also strength

Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost guage from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install.

As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used

Reduces inlet air temperatures = more power

Prevents inlet and turbo from clogging up

Brushed aluminium finish

Made in the UK

Please note that this is machined from one single piece as the pipe is under strain and welded pipes can crack

Please Note: Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emmisions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.

Kit Options:

EGR Delete - A Kit to remove the EGR (Exhaust Gas Recirculation) Valve ONLY, leaving the EGR / Exhaust Cooler in place

EGR & Cooler Delete - A complete kit that removed both the EGR (Exhaust Gas Recirculation) Valve & the EGR Cooler / Exhaust Cooler

Our EGR Delete kit consists of:

Darkside Developments Double Flange Race Pipe
Machined Cap (For Cooler Pipe)
4 x M6 x 20mm BZP Bolts
Vented Grub Screw (Boost Guage Takeoff)
Grub Screw (to block Boost Port)
2 x Water Pipe Blanks (With Cooler Delete)
2 x Mikalor Clamps (With Cooler Delete)
Small EGR Blanking Plate (With Cooler Delete)
2 x Cap Head Bolts (With Cooler Delete)

For more information on EGR Valves and Removal see here

https://www.darksidedevelopments.co.uk/egr-removal-delete/

This Kit will fit the following Vehicles:

Land Rover Freelander TD4 L314 4x4 M47 2.0d
Range Rover Mk3 L322 4x4 M57 3.0d

Replaces Genuine Land Rover Part Number:

LR005791
WAV000010L
WAV000030L
WAV000040

DARKSIDE DEVELOPMENTS ACCEPTS NO RESPONSIBILITY FOR THE USE OF THIS PART ON THE PUBLIC HIGHWAY WHERE REMOVAL OF EMISSIONS CONTROLS IS PROHIBITED. IT IS THE CUSTOMERS RESPONSIBILITY TO ENSURE THEY COMPLY WITH RULES AND LAWS RELATING TO THEIR HOME COUNTRY