P3 Analog Gauge for BMW 3 Series E90/E91/E92/E93 (2004-2013) - Orange Bars / Orange Digits

P3 Analog Gauge for BMW 3 Series E90/E91/E92/E93 (2004-2013) - Orange Bars / Orange Digits

P3 Gauges offer a specialist range of gauges that are fully integrated into an OE air vent providing a clean and sleek look once installed.

All P3 vent gauges are colour matched to seamlessly match the standard interior light display.

The P3 Analogue gaugepulls information through analog sensors only (it does not connect to your vehicle’s network).

This gauge IS NOT plug and play like the OBD2 gauges. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analogue inputs.

analogue boost (yellow/purple/black - dedicated plug for analogue boost sensor) *boost tap not included

analogue input 1 (brown wire - can read any 0-5 volt linear output sensor)

analogue input 2 (blue wire - can read any 0-5 volt linear output sensor)

Battery voltage (red wire / black wire - read through power and ground wires)

optional auto-dim feature (green wire - connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)

Installation Guide:

Configuration and install guides can be found here on the official P3 website here - https://www.p3gauges.com/v3-install/, from instruction guides to video walkthrough tutorials, you should find everything you need.

This Kit Consists of:

Integrated display
analogue Box control unit
Main harness
Hard-wire harness
analogue boost sensor *boost tap not included
Approximately 5' of 5/32" O.D. boost tubing with 5/32" I.D. hose at each end
25 zip ties
24 scotchlok wire taps

P3 Analogue Boost sensor can be found here:

https://www.darksidedevelopments.co.uk/products/p3-gauges-80psi-analog-boost-sensor-required-for-tuned-diesels.html

Browse all P3 Gauges here:

https://www.darksidedevelopments.co.uk/p3-gauges/

P3 Boost Tubing Kit can be found here:

https://www.darksidedevelopments.co.uk/products/p3-gauges-boost-tube-kit-for-analog-boost-sensor.html