Description
Sachs Race Single Mass Flywheel (SMF) & Clutch Kit for VW 02Q 6 Speed
Sachs SRE Single Mass Flywheel and Uprated Clutch Kit to fit VAG 6 Speed 02Q Gearboxes These are a popular conversion on the VW Golf Mk5 Platform with 2.0 TFSI and 2.0 TDI Engines to remove the OEM Dual Mass Flywheel, when either running increased power or the DMF fails The kits are rated by Sachs to 390Ft/Lbs (530Nm)+ for the Organic Disc and 442Ft/Lbs+ (600Nm) for the Sintered Paddle Disc, so will take everything you can throw at them The Sintered disc is only recommended for use on a Race or Track car due to the increased grab caused by the sintered facings, this makes driving in traffic more difficult and increases wear rate. For those who require a kit suited to daily driving, the kit with an Organic disc is the strongest setup available with a stock driving style. We can also offer an OEM Sachs DMF with Sachs SRE Pressure Plate and Clutch Disc for customers who want to retain the comfort of a Dual Mass FlywheelThis kit consists of:
SACHS SRE 240mm Single Mass FlywheelSACHS SRE Organic or Sintered Clutch Disc
SACHS SRE Pressure Plate
Flywheel and Pressure Plate Bolts
SACHS Release Bearing
We also have our Darkside 02Q Single Mass listed here:
We also have a SACHS 02M Single Mass Kit:
Darkside 02M Single Mass
Fitment Data
This Kit will fit Vehicles with the following Engine Codes:
VW Golf Mk5 - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
VW Golf Plus - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
VW Golf Mk6 - CFFA / CBAA (CR136) CBEA / CJAA / CBAB / CFFB (CR140) CFGB / CBBB (CR170)
VW Jetta - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
VW Jetta - CBDA (CR136) CBDB / CBEA / CJAA / CLCB / CFHC / CFFB (CR140) CEGA (CR170)
VW Passat - BWV 120 BVE 122 BMA 136 BKP / BMP (PD140) BMA BUZ 163 BMR (PD170)
VW Passat - CBEA / CJAA / CBAB (CR140) CBAC (CR143 Bluemotion) CBBB (CR170)
VW Passat CC - CBAA (CR136) CBAB / CFFB (CR140) CLLA / CFGB / CBBB (CR170)
VW Touran - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
VW Caddy - BMM (2.0 8v PD140)
VW Eos - BMM (2.0 8v PD140) CBAB / CFFB (CR140)
VW Scirocco - CFHC / CBDB (CR140)
VW Sharan - BVH 136 / BRT 140
VW Tiguan - CBAB / CFFB (CR140)
Audi A3 - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
Audi A3 - CBAA (CR136) CBAB / CLJA / CBEA / CJAA (CR140) CBBB (CR170)
Audi A6 - BRF / BNA 136 CAGB (CR136)
Audi TT - CBBB (CR170)
Seat Leon - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
Seat Leon - CLCB / CFHC (CR140) CEGA / CFJA (CR170)
Seat Toledo - BKD / AZV (PD140) BMN (PD170) CEGA (CR170)
Seat Altea - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
Seat Altea - CFHC / CBDB (CR140) CEGA (CR170)
Skoda Octavia - BKD / AZV (PD140) BMM (2.0 8v PD140) BMN (PD170)
Skoda Octavia - CLCB / CFHC (CR140) CEGA (CR170)
Skoda Superb - CLJA / CFFB (CR140) CFGB / CBBB (CR170)
Skoda Yeti - CBDB (CR140) CEGA (CR170)
PLEASE NOTE - As with most of the Single Mass Flywheel Kits Available, there will be some noise at low RPMs and at idle. This is completely normal and will not damage your gearbox or engine
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
300 | |
For more Information or to make a booking, please CONTACT US |