Screw-Retainer / Thread Lock High Strength 50g

LIQUI MOLY High Strength Screw-Retainer / Thread Lock 50g

Prevents screw connections from working loose and loosening due to vibration. Cures rapidly and reliably. Can be used on oiled surfaces. Seals threads and prevents leaks. Has good chemical resistance. Wide operating temperature range from -60 °C to +150 °C.

For all common nuts and screw sizes of all grades.

Reliable thread locking. Can be used on oiled surfaces and galvanized screws.

Resistant to stresses and vibrations

Can be used on oily surfaces

Rapid curing

Prevents leaks

Wide operating temperature range

Controlled torque / stress ratio

TECHNICAL DATA

Form: liquid
Thread sizes: up to M20
Breakaway torque: 36 Nm DIN EN 15865
Prevailing torque: 43 Nm DIN EN 15865
Chemical resistance: relatively well against oils, gasoline, antifreeze, water and brake fluid
Initial strength: 2-10 min (active); 10-60 min (passive)
Functional strength: 2-4 h
Final strength: 8 h
Operating temperature range: -60 to 150 °C
Thread friction value: 0,17
Compressed shear strength: 25 N/mm² DIN EN 15337
Base: dimethacrylate ester
Density: 1,1 g/cm³ DIN EN 542
Color / appearance: green
Odor: characteristic
Viscosity at 23 °C: 500 mPas
Recommended storage temperature: 8 - 21 °C

AREAS OF APPLICATION

For all common nuts and screw sizes of all grades.

APPLICATION

Apply uniformly to bolts and nuts. Cures in the absence of air (anaerobic). One must differentiate between active and passive materials during the curing time.

Active materials generally refer to metals with a high iron or copper content (e.g. iron, steel, copper, brass, bronze). Active materials ensure rapid curing. Passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics only cure very slowly.