Description
Sachs Race Single Mass Flywheel (SMF) & Clutch Kit for VAG 02M 6 Speed
Sachs Race Engineering Single Mass Flywheel and Uprated Clutch Kit for VAG 6 Speed 02M Vehicles These are a popular conversion on the VW Golf Mk4 Platform with 1.9 TDI and 1.8T Engines to remove the OEM Dual Mass Flywheel, when either running increased power or the DMF fails. The kits are rated by Sachs to 390Ft/Lbs+ (530Nm) for the Organic Disc and 440Ft/Lbs+ (600Nm) for the Sintered Paddle Disc, so will take everything you can throw at them. The Sintered disc is only recommended for use on a Race or Track car due to the increased grab caused by the sintered facings, this makes driving in traffic more difficult and increases wear rate. For those who require a kit suited to daily driving, the kit with an Organic disc is the strongest setup available with a stock driving style. We can also offer an OEM Sachs DMF with Sachs SRE Pressure Plate and Clutch Disc for customers who want to retain the comfort of a Dual Mass Flywheel.Power / Torque Rating:
407Ft/Lbs+ for the Organic Disc
592Ft/Lbs+ for the Sintered Paddle Disc
Please Note:
As with most of the Single Mass Flywheel Kits Available, there will be some noise at low RPMs and at idle. This is completely normal and will not damage your gearbox or engineThis kit consists of:
SACHS SRE 240mm Single Mass FlywheelSACHS SRE Organic or Sintered Clutch Disc
SACHS SRE Pressure Plate
Flywheel and Pressure Plate Bolts
Release Bearing
This Kit will fit the following Vehicles:
VW Golf Mk4 - AJM, AUY 115 / ASZ 130 / ARL 150
VW Bora / Jetta Mk4 - AJM, AUY 115 / ASZ 130 / ARL 150
VW Polo - ASZ, BLT 130
VW Sharan - ANU 90 / AUY, BVK 115 / ASZ 130 / BTB 150
Audi A3 8L - AJM, AUY 115 / ASZ 130 / ARL 150
Seat Leon 1M - AJM, AUY 115 / ASZ 130 / ARL 150
Seat Ibiza Mk4 - ASZ, BLT 130 / BPX, BUK 160
Seat Ibiza Mk5 - CFHD 143
Seat Cordoba - ASZ, BLT 130
Seat Toledo - ASZ, BLT 130
Seat Alhambra - ANU 90 / AUY, BVK 115 / ASZ 130 / BTB 150
Skoda Octavia Mk1 - ASZ 130
Skoda Fabia vRS - ASZ, BLT 130
Ford Galaxy - ANU 90 / AUY, BVK 115 / ASZ 130 / BTB 150
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
300 | |
For more Information or to make a booking, please CONTACT US |