ST Coilovers ST XTA Plus 3 for Mini F55 / F57 One / Cooper

Complete ST Suspension ST XTA Plus 3 Way Adjustable Coilovers for Mini F55 / F57 One / Cooper

The XTA plus 3 coilover kit gives your car maximum performance for the road and the tools you need for any challenge.

From the factory, the XTA plus 3 coilover kit is equipped with KW dampers that are adjustable in high- and lowspeed compression as well as adjustable rebound damping. With 24 clicks of adjustment for each, high speed and low speed compression damping and 18 clicks of rebound adjustment, your suspension knows no limits. It doesn’t matter if you bolt in an aftermarket roll cage, weld in a cage, modification to PU bushings upgrade to spherical bushing or changed wheel loads – the XTA plus 3 coilover has what it takes to keep your car dialed! Of course, the XTA plus 3 also includes a parts approval certificate, race springs and aluminium unibal top mounts.

3-way adjustable dampers

Scaled camber adjustment, when possible

Aluminium adjustable uniball top mounts (when possible)

Complete solution with adjustable spring plate, spring system and bumpers with dust protection

Galvanized coilover struts with additional coating for an optimized corrosion protection

Front and rear axle (when possible) with thread adjustment

Individual lowering within the tested adjustment range

Reduced system friction for effective damping adjustment

Latest damping technology for maximum longevity

Easy lowering adjustment:

Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA plus 3 coilovers due to the type of construction.

KW Engineering: Exclusive for ST suspension

The high-quality ST XTA plus 3 coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.

Axle Weights and Lowering:

Front axle: up to 1005KG
Rear Axle: up to 860KG

Lowering FA/RA (mm): 25-50/30-55
(For vehicles with factory lowering, the lowering mentioned is reduced)

This Kit will fit the following Vehicles:

MINI (F55) 09/2013-
MINI Convertible (F57) 11/2014-

ST Suspension Part Number:

No EDC (Electronic Dampers): 18202208AT
With EDC (Electronic Dampers): 18202208AU