Description
Swirl Flap Delete Kit for BMW G Series B57 3.0 Diesel Engines
Darkside Swirl Flap Delete Kit for BMW G Series B57 6 Cylinder 3.0 Diesel Engines This kit allows you to remove the problematic swirl flaps that are known to degrade and eventually disintegrate. This then ends up being sucked into the engine, most of the time with dire consequences.Fitment for Intake Manifolds with part number 11618477030:
Please note, for this intake manifold we now also supply an M10 bolt. We have found in some cases the swirl flap plug provided does not seal underneath the Swirl Flap Actuator as it should. In this instance we recommend to drill and tap the hole, and then to use the M10 Bolt supplied to seal the manifold correctly.
This Kit Consists of:
1x Swirl Flap Delete Bung6x Inlet Seals
Series / Chassis
G01 / G02 / G11 / G12 / G30 / G31 / G32Models
530d / 530dX / 540dX / 630d / 630dX / 640dX / 730d / 730dX / 730Ld / 730LdX / 740dX / 740LdX / X3 / X4Engines
B57This Kit will fit the following Vehicles:
G01 B57 X3 30dX (TX71) SAVG01 B57 X3 30dX (TX72) SAV
G01 B57 X3 30dX (TX75) SAV
G01 B57 X3 30dX (TX76) SAV
G01 B57 X3 30dX SAV
G02 B57 X4 M40dX SAC
G11 B57 730d Saloon
G11 B57 730d Saloon from 10.2016 till 09.2018
G11 B57 730d Saloon till 11.2016
G11 B57 730dX Saloon
G11 B57 730dX Saloon from 10.2016 till 09.2018
G11 B57 730dX Saloon till 11.2016
G11 B57 740dX Saloon
G11 B57 740dX Saloon from 10.2016 till 09.2018
G11 B57 740dX Saloon till 11.2016
G12 B57 730Ld Saloon
G12 B57 730Ld Saloon from 10.2016 till 09.2018
G12 B57 730Ld Saloon till 11.2016
G12 B57 730LdX Saloon
G12 B57 730LdX Saloon from 10.2016 till 09.2018
G12 B57 730LdX Saloon till 11.2016
G12 B57 740LdX Saloon
G12 B57 740LdX Saloon from 10.2016 till 09.2018
G12 B57 740LdX Saloon till 11.2016
G30 B57 530d Saloon
G30 B57 530dX Saloon
G30 B57 540dX Saloon
G31 B57 530d Touring
G31 B57 530dX Touring
G31 B57 540dX Touring
G32 B57 630d Gran Turismo
G32 B57 630dX Gran Turismo
G32 B57 640dX Gran Turismo
To Fit Genuine BMW Inlet Part Numbers:
11 61 8 596 319 - 11618596319 - 8 596 319 - 8596319
11 61 8 477 030 - 11618477030 - 8 477 030 - 8477030
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
180 | |
For more Information or to make a booking, please CONTACT US |