Transporter T5.1 2.0 TDI CR DPF Delete Downpipe

Volkswagen Transporter T5 / T5.1 / T5.5 2.0 TDI Common Rail 2.5" Stainless DPF Delete Downpipe

This 2.5" Stainless Steel Downpipe DPF Delete is a straight replacement to remove the factory Diesel Particulate Filter (DPF) on the 2.0 Common Rail Engines found in the Transporter T5 / T5.1 / T5.5

Increased Performance and Driveability

Made from Aircraft-grade Stainless Steel

High Flow for Maximum Performance

Designed and Made in the UK

This Kit Consists of:

2 Piece DPF Delete Downpipe
1x Downpipe Gasket
2x T-Bolt Clamps

This item will fit Vehicles with the following Engine Codes:

VW Campmobile Type 2 / T2 - CAAB (102) CAAD (114) CCHB (136) CCHA (140) CAAC (140) CFCA (180)

VW Transporter Kombi - CAAA (84) CAAB (102) CAAD (114) CCHB (136) CAAE (136) CCHA (140) CAAC (140) CFCA (180)

Replaces Genuine VW Part Numbers:

7E0254700B - 7E0254700 B - 7E0 254 700 B
7E0254700BX - 7E0254700 BX - 7E0 254 700 BX
7E0254700C - 7E0254700 C - 7E0 254 700 C
7E0254700CX - 7E0254700 CX - 7E0 254 700 CX
7E0254700D - 7E0254700 D - 7E0 254 700 D
7E0254700DX - 7E0254700 DX - 7E0 254 700 DX
7E0254700E - 7E0254700 E - 7E0 254 700 E
7E0254700EX - 7E0254700 EX - 7E0 254 700 EX
7E0254700F - 7E0254700 F - 7E0 254 700 F
7E0254700FX - 7E0254700 FX - 7E0 254 700 FX
7E0254700GX - 7E0254700 GX - 7E0 254 700 GX
7E0254700H - 7E0254700 H - 7E0 254 700 H
7E0254700HX - 7E0254700 HX - 7E0 254 700 HX
7E0254700JX - 7E0254700 JX - 7E0 254 700 JX
7E0254800B - 7E0254800 B - 7E0 254 800 B
7E0254800BX - 7E0254800 BX - 7E0 254 800 BX
7E0254800C - 7E0254800 C - 7E0 254 800 C
7E0254800CX - 7E0254800 CX - 7E0 254 800 CX
7E0254800D - 7E0254800 D - 7E0 254 800 D
7E0254800DX - 7E0254800 DX - 7E0 254 800 DX
7E0254800EX - 7E0254800 EX - 7E0 254 800 EX
7E0254800FX - 7E0254800 FX - 7E0 254 800 FX

When buying the DPF Delete Pipe on its own you will require a custom ECU Remap to erase any fault codes or engine management lights. We will not be responsible for any problems that may occur with any other tuners software

Darkside Developments accepts no responsibility for the use of this part on the public highway where removal of emissions controls is prohibited. It is the customers responsibility to ensure they comply with rules and laws relating to their home country

Our DPF Delete Pipes are supplied with only a Lambda Sensor Boss. The Pre-Turbo EGT Boss is located in the Exhaust Manifold on the Turbocharger. All other EGT and Pressure Sensors are not required when removing the DPF, leaving them in the downpipe can eventually lead to sensor failure, creating a fault in the ECU and possibly a Check Engine Light in the Instrument Cluster. With the correct DPF Delete Software, these sensors are removed entirely so they can be unplugged and removed from the car. If your tuner cannot remove these faults, the sensors should be left plugged in and wrapped out of the way