Description
- 51mm Alloy pipes to fit perfectly in place of the stock pipes
- Replaces unnecessary joints which can cause boost leaks
- Upgraded Intercooler Kit for VW Golf / Bora / A3 / Leon / Octavia
- Alloy end tanks to hold a higher level of boost
- Capable of up to 230bhp
This intercooler is capable up to 230bhp, above this we recommend a Front Mounted Intercooler with greater airflow to keep IAT's low
The welded Alloy Pipes are 51mm and fit perfectly in place of the stock turbo pipes
This kit consists of:
Darkside Developments Alloy Pipe Kit
Darkside Developments Alloy Side Mount Intercooler (SMIC) with MAP Sensor Boss
Darkside Developments Turbo Clip Connector Adapter
Darkside Developments Silicone Hoses
Viton O-Ring Seals on Clip Connector Adapter
Stainless Steel Clamps
Please select from the options above which EGR Valve / Delete you have. This is so we can send the correct silicone hose to suit the EGR fitted to the vehicle.
EGR Delete Is NOT Included with the Intercooler Kit
This will fit the following vehicles with the 1.9 8v TDi Engine when installed with a VNT17 Turbocharger
VW Golf Mk4 - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
VW Bora / Jetta - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
Seat Leon - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
Seat Toledo - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
Audi A3 - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
Skoda Octavia Mk1 - ALH 90, ATD / AXR 100, ASV / AFN / AHF 110, AJM 115
If you have a stock turbocharger we have the correct kit listed here:
https://www.darksidedevelopments.co.uk/products/upgraded-side-mount-intercooler-kit-for-1-9-td-ve-90-110-pd100-pd115.html
The EGR Delete for the 90 / 110 / PD100 and PD115 to be used with this kit is listed here:
https://www.darksidedevelopments.co.uk/products/darkside-1-9-8v-tdi-ve-90-110-and-pd100-pd115-egr-delete-race-pipe-51mm.html
All Side Mount Intercoolers come with a 18mm Map Sensor Boss (Large Probe) but include a 12mm reducing bung to also suit small probe sensors.
You can check the Map Sensor part number against the ones we have listed to find out what size you have - https://www.darksidedevelopments.co.uk/sensors/
PLEASE NOTE: All the silicones included in the kit may require slight Trimming to suit your set up, These are left long to take in to consideration tolerances between cars
We now offer a range of Silicone Colours - Black Silicones are in stock where as the other colours are special order and may take up to 1 week to dispatch
(Sometimes the turbo clip can be quite tight to push in due the tolerances we have them machined to. We have found that warming the turbo compressor housing with a heat gun helps the clip push in)
Please Note: This will NOT fit the Seat Ibiza / VW Polo and Skoda Fabia please see below for the correct kit
https://www.darksidedevelopments.co.uk/products/hard-pipework-kit-for-seat-ibiza-vw-polo-skoda-fabia-with-seatsport-fmic.html
https://www.darksidedevelopments.co.uk/products/seatsport-ibiza-cupra-intercooler-for-seat-ibiza-vw-polo-skoda-fabia.html
Additional Information
Vehicle Manufacturer: |
VAG |
Product Type: |
Intercooler / Pipework Kits |