Description
Water Pump Blank Kit for 1.9 & 2.0 TDI Engines
Darkside Developments Water Pump Blanking Kit for ALL 1.9 & 2.0 TDI Engines to be used when a Pierburg CWA Electronic Water Pump is fitted This kit allows you to blank the waterpump hole in the engine block and replace with a regular pulley which is needed when fitting the Pierburg CWA Electric Waterpump You will find the links to the Electronic Water Pump and Water Pump Controller below in this listing.Please Note: There are two types of water pumps on the 1.9 & 2.0 TDI Engines, please see the following pictures of water pumps to select the correct kit for your vehicle
DSD4444 - Gasket Sits on the base of the Flange on the Water Pump (Please See Picture)
DSD4448 - Gasket sits AROUND the Water Pump (Please See Picture)
DSD4449 - Same as DSD4448 Gasket sits AROUND the Water Pump (Please See Picture)
This Kit Consists Of:
1x Water Pump Flange Blanking Plate1x Aluminium Flange Blank
1x Cambelt Pulley
Please find the Pierburg CWA Electric Waterpump - CWA 400 here:
https://www.darksidedevelopments.co.uk/products/pierburg-cwa-electric-waterpump-cwa-400.html
Please Find the Tecomotive tinyCWA - Pierburg CWA Electric Waterpump Controller here:
This Kit will fit ALL Vehicles with 1.9 & 2.0 TDI PD & CR / Common Rail Engines (PLEASE SEE ABOVE PICTURES FOR WATER PUMP DESIGN BEFORE ORDERING)
DSD4444 Replaces VW Water Pump Part Numbers:
045121011F - 045121011 F - 045 121 011 F045121011H - 045121011 H - 045 121 011 H
DSD4444 Replaces VW Coolant Outlet Part Numbers:
038121121D - 038121121 D - 038 121 121 D
DSD4448 Replaces VW Water Pump Part Numbers:
03L121011G - 03L121011 G -03L 121 011 G
DSD4448 Replaces VW Thermostat Housing Part Numbers:
03L121111AE - 03L121111 AE - 03L 121 111 AE03L121111P - 03L121111 P - 03L 121 111 P
DSD4449 Replaces VW Water Pump Part Numbers:
03L121011G - 03L121011 G -03L 121 011 G
DSD4449 Replaces VW Coolant Outlet Part Numbers:
038121121D - 038121121 D - 038 121 121 D
If you have any queries on Vehicle Fitment please contact us before ordering
Estimated Fitting Costs
Darkside Developments offers professional in-house fitting for all products at our workshop located in Barnsley, South Yorkshire
Estimated Labour Time (Hours) | Labour Cost |
---|---|
300 | |
For more Information or to make a booking, please CONTACT US |