Turbochargers and Parts

OE VZK Turbocharger Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the VZK turbocharger on the later 2.7 / 3.0 TDI Audi Vehicles This kit is made up of OE / Audi Parts; 1 x Downpipe Gasket1x Oil Return...

GTB1756VK / GTB2056VK / GTB2260VK 2.7 & 3.0 TDI Turbo Fitting Kit This is the complete fitting kit which is needed when removing & re-fitting the turbocharger on the 2.7 / 3.0 TDI Vehicles This kit is made up of OE / Audi Parts; 2 x Oil Feed...

GTB Gas Seal Ring for GTB Turbochargers 15xxVK - 25xxVK (For Nozzle Assembly Cage) Ideal for turbocharger rebuild We can also supply the following GTB2260VK parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring CageNozzle Ring AssemblyVNT...

Braided Turbo Oil Return Line for VW Passat & Audi A4 / A6 with GTB Turbo (Tubular Manifold) Fits ALL VW Passat / Audi A4 & A6 and Skoda Superb Vehicles with the 1.9 and 2.0 TDI Engines fitted with our Tubular...

Darkside GTB2566VK Billet Compressor Wheel Larger Billet Compressor Wheel to upgrade Garrett GTB2260VK Turbocharger into a GTB2566VK The compressor wheel is our own design to prevent surge and with extended tip technology so it flows well...

Braided Turbo Oil Feed Pipe for 1.6 & 2.0 TDI EnginesFits ALL VW / Audi / Seat and Skoda Vehicles with the 1.6 and 2.0 TDI CR Engines This kit consists of:Darkside Developments Braided Oil Feed LineBanjo Bolts and...

NXS Motorsports Signature Series Manual Boost Controller These units incorporate a stainless steel spring and stainless steel ball bearing. This combination allows your engine to realize gains of up to 30 psi while being able to fine tune your desired...

Brand New GTB1756VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA...

Brand New GTB2260VK CHRA (Center Housing Rotating Assembly) with Standard Wheel Ideal for turbocharger rebuild Balanced assembly ready to install Standard Balance - (0.65G, 0 – 90,000rpm / 2.00G, 90,000 – 132,000rpm) This CHRA assembly...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB2260VK CHRA with Billet CoreNozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible...

GTB2260VK Nozzle Ring Assembly Ideal for turbocharger rebuild We can also supply the following parts for a full rebuild:GTB1756VK CHRANozzle Ring CageSteel Turbine Housing Gasket VNT Nozzle Ring BoltGTB Gas Seal Ring Compatible with the...

OE 2.0 TDi Common Rail Electronic / Vacuum Actuator (Oval Port) MK7 Golf Platform Found on the KKK Turbochargers fitted to the later Common Rail Engines such as the VW Golf MK7 Platform Engines Direct replacement for standard Vacuum Actuator...