Oil Lines and Parts

Melett Electronic Actuator for VW Crafter 2.5 TDI Brand New Melett Electronic Actuator for VW Crafter 2.5 TDI This is a direct replacement for the Standard Actuator, VW will require you to buy a new...

Electronic / Vacuum Actuator for 2.0 16v TDI PPD170 BMN Engines Direct replacement Actuator for the PPD170 BMN Turbochargers fitted to the VW Golf Mk5, Audi A3 and Skoda Octavia, Seat Leon as well as others Not to be confused with cheaper chinese...

GTB1756VK Steel Turbine Housing Gasket This steel gaskets seals the Tubine Housing (Hot Side) to the CHRA (Centre Housing Rotating Assembly) Ideal for turbocharger rebuild Compatible with the following turbocharger part numbers: VW...

M5 x 15mm Repair Washer M5 repair washer with an outer diameter of 15mm

Borgwarner / KKK Electronic Actuator for BV50 Turbocharger This actuator is a brand new direct replacement for the standard actuator found on the 2.7 and 3.0 TDi with Borgwarner / KKK BV50 Turbochargers They are perfect to replace an old, broken actuator...

Electronic / Vacuum Actuator for 1.6 TDI Ibiza / Polo / Fabia CR Engines Electronic / Vacuum Actuator for 1.6 TDI Ibiza / Polo / Fabia CR Engines Found on the KKK Turbochargers fitted to the later Common Rail Engines such as the VW Polo 6R, Skoda Fabia...

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Oval Port) Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Oval Port) Found on the KKK Turbochargers fitted to the later Common Rail Engines such as the VW Golf Mk6, Audi A3 and Skoda...

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Round Port) Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines (Round Port) Melett VW 2.0 TDi Common Rail Electronic / Vacuum Actuator (Round Port) Found on the KKK Turbochargers fitted to the...

Electronic / Vacuum Actuator for 2.0 16v TDI CR Engines with Garrett Turbocharger Found on the Garrett Turbochargers fitted to the later Common Rail Engines such as the VW Golf Mk6, Audi A3 and Skoda Octavia as well as others The turbo actuators can...

Genuine VW M8 10mm Copper Exhaust Nut Special VW Size Exhaust Nuts M8 Thread with 10mm 6 Point head used on the Exhaust Manifold Studs and Downpipe Studs ...

M10x1.5 to M8x1.25 Repair Exhaust Studs These studs are ideal for replacing damaged / stripped M8x1.25 threads. Simple drill out and retap to M10x1.5 The M8 side can be cut to the desired length so can be used on most...

Nord-Lock M8 Steel Lock Washers These new Nord-Lock x-series washers are idea for securing turbochanges, manifold and downpipes We have sometimes found in the past that the heat cycles and vibrations caused by the engine can loosen nuts and bolts on...