Front Upper Gearbox Mount Insert - PFF85-441BLKPFF85-441BLK uses our stiffest Black Series 95A material, providing a no-compromise performance option for track-focused builds. A small increase in NVH, usually at idle, should be expected when stiffening...

Front Upper Gearbox Mount Insert (Diesel) - PFF85-441RPFF85-441R uses our softest Red 65A material, specifically designed to minimise NVH transmission. Recommended for unmodified Diesel models or for drivers who want a subtle improvement in driving feel,...

Front Upper Gearbox Mount Insert - PFF85-441PFF85-441 uses our Yellow 70A durometer material, providing an excellent balance of strength and compliance for improved performance, whilst limiting NVH transmission into the cabin. This part is recommended...

PowerAlign Wheel Mounting Guide Pin - PF99-512-15Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy...

Jack Pad Adaptor - PF3-1664Made from Black 95A durometer PU for durability and designed to fit into the original rectangular plastic lifting point, these handy workshop widgets help lift/jacking stability and location whilst protecting the underside of...

Rear Bump Stop - 60mm x 58mm x 10.5mm - 2 x BS008BS008 is designed to fit in place of the factory rear rubber bump stopSize60mm x 58mm x 10.5mmCompoundRoad SeriesLocation on VehicleBump StopAdjustmentFixedIncluded in the Kit:2 x BS008 - Rear Bump StopTo...

Handling Pack - PF85K-1009Fits all turbocharged models, and all post-2016 VW Up!CompoundRoad SeriesIncluded in the Kit:2 x PFF85-201 - Front Wishbone Front Bush 30mm2 x PFF85-1202 - Front Arm Rear Bush2 x PFR85-1910 - Rear Beam Mounting Bush1 x...

Jacking Point Insert - PF3-1663PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points...

Jacking Point Insert Kit of 4 - PF3-1663KPFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift...

Exhaust Mount - EXH007CompoundRoad SeriesLocation on VehicleExhaustAdjustmentFixedIncluded in the Kit:1 x EXH007 - Exhaust MountReplaces Part Numbers191253147A - 191253147 A - 191 253 147 ATo fit the following vehicles50 - 1975-1978Toledo Mk1 - 1L -...

PowerAlign Camber Bolt Kit (14mm) - PFA100-14Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm boltSize14mmAdjustmentAdjustableIncluded in the Kit:1 x PFA100-14 - PowerAlign Camber Bolt Kit (14mm)Why...

Jack Pad Adaptor - 80mm Diameter - PF3-1661PF3-1661 is a polyurethane jack pad to fit around and protect the sill, designed to help lift stability and location, whilst protecting the underside of your vehicle.Size80mm DiameterCompoundRoad SeriesLocation...